UK Engine Machining Rate Card
The median published figure in the UK Engine Machining Rate Card is 57.09 GBP across 4 sources' own pages (range 50 to 70 GBP), read 11 November 2026.
4 of the 32 named sources read in full publish a figure; 28 publish none, read 11 November 2026.
The median is unchanged since 21 October 2026 (was 57.09 GBP across 4).
By operation
| Breakdown | Median | Range | Sources |
|---|---|---|---|
| operation rebore and hone | 54.17 GBP (one figure) | one figure, no range | 1 |
Every figure, with its source
One row per published figure: the figure as the source's own page publishes it, the page, and the day it was read. A figure that is not on a page we read is not on this one.
| Source | Figure | Breakdown | Read |
|---|---|---|---|
| Cylinder Head Skimming, prices | 70 GBP + VAT | 2026-11-11 | |
| LDS Engineering, cylinder head skim (aluminium) | 60 GBP | 2026-11-11 | |
| Pro-Race Engineering, cylinder rebore and hone per cylinder | 54.17 GBP | rebore and hone | 2026-11-11 |
| Roberts Fabrications, cylinder head skimming | 50 GBP + VAT | 2026-11-11 |
The sentence each figure was read from (4)
- Cylinder Head Skimming, prices, read 2026-11-11:
Flycut up to 10 thou from £70 +vat
- LDS Engineering, cylinder head skim (aluminium), read 2026-11-11:
Drop off your cylinder head if you are local to Farnham (GU10) and as long as it is serviceable it will have the minimum amount of material possible removed from the cylinder face. £60.00 for a skim on any 4 cylinder head
- Pro-Race Engineering, cylinder rebore and hone per cylinder, read 2026-11-11:
£54.17 – £70.83
- Roberts Fabrications, cylinder head skimming, read 2026-11-11:
Cylinder Head Skimming – From £50 + VAT
Read in full, publishes no figure
28 named sources were read in full on the dates shown and print no usable figure. They are counted, never filled in.
- Pro-Race Engineering, cylinder services price list, read 2026-11-11: every candidate on the page was refused
- Villiers Services, workshop rates, read 2026-09-12: every candidate on the page was refused
- LDS Engineering, cast iron cylinder head skim, read 2026-11-11: every candidate on the page was refused
- MNR Reconditioning, engine boring, read 2026-09-12: every candidate on the page was refused
- MNR Reconditioning, cylinder head machining, read 2026-11-11: every candidate on the page was refused
- MNR Reconditioning, motorcycle engine machining, read 2026-11-11: every candidate on the page was refused
- MNR Reconditioning, tractor engine machining, read 2026-11-11: every candidate on the page was refused
- Reconditioning Experts, crankshaft grinding, read 2026-10-12: read in full and no accepted figure on the page
- Reconditioning Experts, crankshaft machining, read 2026-11-11: read in full and no accepted figure on the page
- Reconditioning Experts, valve grinding, read 2026-11-11: read in full and no accepted figure on the page
- Damico Engines, machining services, read 2026-10-12: read in full and no accepted figure on the page
- Cast Iron Welding Services, cylinder head skimming, read 2026-11-11: read in full and no accepted figure on the page
- Headshop (UK), cylinder head skimming and pressure testing, read 2026-10-12: read in full and no accepted figure on the page
- Price Bros Auto Engineering, cylinder head repairs, read 2026-09-12: read in full and no accepted figure on the page
- Fields Engine Service, crankshaft grinding, read 2026-09-12: read in full and no accepted figure on the page
- Precision Engine Services (Inverness), engine reconditioning, read 2026-09-12: every candidate on the page was refused
- South Wales Pistons, engine reconditioning, read 2026-09-12: read in full and no accepted figure on the page
- Southern Rebore, read 2026-09-12: read in full and no accepted figure on the page
- Cambridge Rebores, read 2026-09-12: read in full and no accepted figure on the page
- R H Engine Centre (King's Lynn), read 2026-09-12: read in full and no accepted figure on the page
- Bradford Grinders (UK), read 2026-09-12: read in full and no accepted figure on the page
- W Drake (Bradford), read 2026-09-12: read in full and no accepted figure on the page
- Powermax Engineering (Northern Ireland), read 2026-09-12: read in full and no accepted figure on the page
- Byre Engineering (Belfast), read 2026-11-11: read in full and no accepted figure on the page
- Lyons Engineering (Brynmawr), read 2026-11-11: read in full and no accepted figure on the page
- Kilmarnock Engine Services, read 2026-11-11: read in full and no accepted figure on the page
- Engine Surgeons (London), read 2026-11-11: read in full and no accepted figure on the page
- Specialist Components, engine machining price list (PDF), read 2026-09-12: every candidate on the page was refused
Methodology
Every row is a verbatim sentence read from the named source's own page through our fetch service on the date shown, hash-pinned to the stored read (the sha of the page's visible text; the raw page is mirrored to R2).
4 of the 32 named sources that could be read published a usable figure; 28 published none and are recorded as not published, never filled in; 0 could not be read (blocked, dead or unreachable) and count nowhere.
The headline figures (median, minimum, maximum, quartiles) are over ONE figure per source in GBP (a source's median where its page yielded several accepted sentences), so N counts sources, never sentences; 57 candidate sentence(s) were refused by a reviewer with the reason recorded.
The fuller derivation this dataset is chartered to grow into (not yet what the figures above are; they are each source's own published figure as read): one row per operation per shop at the unit the shop prices it in (per cylinder, per journal, per head, per block), normalised to a common unit so a median, minimum and maximum can be stated per operation across the UK; the sum of the median operations is the machining half of a rebuild, which is the figure a buyer cannot get anywhere without ringing ten shops; and the share of shops publishing each operation, measured per operation rather than per shop
57 candidate sentences on these pages were refused by a reviewer; each refusal and its reason is recorded in the review ledger.
Sources (32)
- Pro-Race Engineering, cylinder rebore and hone per cylinder(the publisher's own terms; quoted for reporting and comment)
- Pro-Race Engineering, cylinder services price list(the publisher's own terms; quoted for reporting and comment)
- Cylinder Head Skimming, prices(the publisher's own terms; quoted for reporting and comment)
- Villiers Services, workshop rates(the publisher's own terms; quoted for reporting and comment)
- LDS Engineering, cast iron cylinder head skim(the publisher's own terms; quoted for reporting and comment)
- LDS Engineering, cylinder head skim (aluminium)(the publisher's own terms; quoted for reporting and comment)
- MNR Reconditioning, engine boring(the publisher's own terms; quoted for reporting and comment)
- MNR Reconditioning, cylinder head machining(the publisher's own terms; quoted for reporting and comment)
- MNR Reconditioning, motorcycle engine machining(the publisher's own terms; quoted for reporting and comment)
- MNR Reconditioning, tractor engine machining(the publisher's own terms; quoted for reporting and comment)
- Reconditioning Experts, crankshaft grinding(the publisher's own terms; quoted for reporting and comment)
- Reconditioning Experts, crankshaft machining(the publisher's own terms; quoted for reporting and comment)
- Reconditioning Experts, valve grinding(the publisher's own terms; quoted for reporting and comment)
- Damico Engines, machining services(the publisher's own terms; quoted for reporting and comment)
- Roberts Fabrications, cylinder head skimming(the publisher's own terms; quoted for reporting and comment)
- Cast Iron Welding Services, cylinder head skimming(the publisher's own terms; quoted for reporting and comment)
- Headshop (UK), cylinder head skimming and pressure testing(the publisher's own terms; quoted for reporting and comment)
- Price Bros Auto Engineering, cylinder head repairs(the publisher's own terms; quoted for reporting and comment)
- Fields Engine Service, crankshaft grinding(the publisher's own terms; quoted for reporting and comment)
- Precision Engine Services (Inverness), engine reconditioning(the publisher's own terms; quoted for reporting and comment)
- South Wales Pistons, engine reconditioning(the publisher's own terms; quoted for reporting and comment)
- Southern Rebore(the publisher's own terms; quoted for reporting and comment)
- Cambridge Rebores(the publisher's own terms; quoted for reporting and comment)
- R H Engine Centre (King's Lynn)(the publisher's own terms; quoted for reporting and comment)
- Bradford Grinders (UK)(the publisher's own terms; quoted for reporting and comment)
- W Drake (Bradford)(the publisher's own terms; quoted for reporting and comment)
- Powermax Engineering (Northern Ireland)(the publisher's own terms; quoted for reporting and comment)
- Byre Engineering (Belfast)(the publisher's own terms; quoted for reporting and comment)
- Lyons Engineering (Brynmawr)(the publisher's own terms; quoted for reporting and comment)
- Kilmarnock Engine Services(the publisher's own terms; quoted for reporting and comment)
- Engine Surgeons (London)(the publisher's own terms; quoted for reporting and comment)
- Specialist Components, engine machining price list (PDF)(the publisher's own terms; quoted for reporting and comment)
Cite or embed this figure
The median published figure in the UK Engine Machining Rate Card is 57.09 GBP across 4 sources' own pages (range 50 to 70 GBP), read 11 November 2026.
4 of the 32 named sources read in full publish a figure; 28 publish none, read 11 November 2026.
UK Engine Machining Rate Card, operation rebore and hone: median 54.17 GBP across 1 source, read 11 November 2026.
The median is unchanged since 21 October 2026 (was 57.09 GBP across 4).
Cite as: "enginerebuildcost.co.uk UK Engine Machining Rate Card", updated 2026-11-12, https://enginerebuildcost.co.uk/datasets/uk-engine-machining-rate-card/.
Download the CSV (4 rows, computed 2026-11-12)
Get engine rebuild quotes
Two minutes of questions and engine builders near you get in touch directly. Free, no obligation.
Questions this data answers
What does each priced operation inside a rebuild cost at a UK machine shop: rebore and hone, crank regrind, head skim, pressure test, line bore, balancing?
The median published figure in the UK Engine Machining Rate Card is 57.09 GBP across 4 sources' own pages (range 50 to 70 GBP), read 11 November 2026.
Where do the figures in the UK Engine Machining Rate Card come from?
Every figure is quoted from its source's own page and dated (last read 11 Nov 2026). 32 named sources were read and 4 publish a figure; the 28 that publish none are recorded as not published, never estimated.